Two Zendure SuperBase V4600 Stations, B4600 & Home Panel review

This U.S. selector package combines two SuperBase V4600 stations, one matching B4600 Satellite Battery and Zendure’s Home Panel. Two 4,608 Wh base batteries plus the one included 4,608 Wh satellite yield 13,824 Wh of nameplate storage. With the two same-type stations connected through the included Home Panel, Zendure documents up to 7,600 W combined rated output. The extra battery adds stored energy; it is not a third inverter.

A fixed backup plan, not a wheeled camping setup

The Home Panel is the key reason to consider this option over two independent V4600 stations. Zendure’s U.S. installation manual identifies a ten-circuit, 120/240 V Home Panel with EV outlets and supports the paired station arrangement. In that plan, the manufacturer lists 7,600 W for the pair—two 3,800 W stations—not 7,600 W per station. A licensed electrician should determine whether the exact circuits, service and installation meet local requirements. The bundle includes a panel component, not a completed transfer installation, wiring or labor.

For an ordinary 120 V load plugged directly into a station, each base still has its own output limits. For home-panel service, follow the panel and station topology rather than inferring that every receptacle becomes 240 V. Zendure lists four ordinary 120 V outlets and two Zen outlets on each station; the Zen outlets’ selectable voltage is not a replacement for the documented Home Panel plan. Check each load’s running and startup needs against the rated system output. The separate 5,000 W peak/AmpUp figure should not be substituted for continuous output.

One battery is included, not the maximum system

This offer names one B4600 for two bases. The saved selector does not allocate that battery to a particular station; the manual explains how a compatible satellite connects, and the paired Home Panel draws on the two-station configuration. At package level the nameplate total is 13,824 Wh. That is not a guaranteed amount delivered to appliances over AC after losses and reserve. The V4600 and B4600 are the matching LFP models. Zendure allows further matching packs—up to four per station—but those are not included and B6400 units must not be mixed into this system.

Solar charging can be planned separately: Zendure lists up to 3,000 W at each V4600 within its voltage/current limits. No panel is included in this option. The AC input spec is 1,800 W at 120 V or 3,600 W at 240 V per station, so the charging voltage matters. The product also has USB and 12 V output options; the 126 W manual ceiling combines car and DC5521 ports and should not be read as a per-outlet guarantee. The 13 ms UPS figure is a manufacturer specification and needs load-specific validation if equipment is sensitive to transfer interruptions.

Plan for the physical system and its alternatives

The base units weigh 121 lb each, the B4600 93 lb, and the Home Panel about 19.4 lb: roughly 354 lb of named components before packaging. This is a stationary backup project with movable modules, not a light portable station. If you only need two independent outlets in separate rooms or locations, the same two-station offer without the Home Panel avoids an installation component, though it is not the 7,600 W linked plan. If you need one power source with more stored energy, compare the V6400 family; if your household plan needs linked 7,600 W, this exact two-station panel configuration is the one to assess with an electrician.

The selector snapshot showed this offer unavailable; that observation does not establish discontinuation. No installation or runtime test is claimed here. Confirm the service topology and circuit list with the manufacturer and installer before treating it as a backup design.