On this page
Your needs, this model
Does it fit your priorities?
Will 25,752 Wh of nameplate storage from this one-V6400 package serve a 120 V load plan below the station’s 3,800 W continuous AC rating?
The exact selector option includes a V6400 plus 3 matching B6400 packs for 25,752 Wh nameplate. The extra batteries extend storage, not the one station’s 3,800 W AC ceiling.
Explore this need in the finder →Does this exact selector choice include at least 3 compatible B6400 Satellite Batteries?
The saved official selector title is “V6400 / 3 / Yes” (variant 40157856727114); it names 3 matching expansion batteries. SKU is not exposed for this option.
Explore this need in the finder →Do you need this exact offer to include the ten-circuit Home Panel, and will an electrician verify a single-station circuit plan before installation?
The selector says Home Panel Yes. Its own manual specifies ten circuits and professional installation, but the saved evidence does not settle this exact single-station service topology; verify it before relying on backup circuits.
Explore this need in the finder →“V6400 / 3 / Yes” is the Zendure U.S. selector combination for one SuperBase V6400, three matching B6400 Satellite Batteries and the Home Panel. Their nameplate capacities total 25,752 Wh. The selector snapshot marked this offer unavailable then; it does not establish discontinued status. It is an unusual combination of substantial stored energy and a home-circuit component, but it remains a single-station 3,800 W continuous AC plan.
Three batteries add duration only
The V6400 base and each B6400 are listed at 6,438 Wh. Three satellites make four times the base capacity, which can stretch an outage plan for loads that fit one inverter. It does not increase continuous output to 7,600 W: that figure belongs to Zendure’s documented two-station Home Panel plan, and this package has one station. The 5,000 W peak number is also not a continuous rating. Size from appliance input and start-up needs, not capacity alone.
Nameplate storage is not a promise of AC energy at the wall. Conversion losses, reserve settings, load shape and temperature reduce or change delivered time. The two-B6400 panel package is lighter and totals 19,314 Wh; the four-B6400 choice reaches 32,190 Wh but uses the station’s full four-pack expansion limit. This three-pack option occupies the middle ground, with one slot left for a future compatible B6400.
Professional installation must verify the single-station use
The Home Panel is a ten-circuit 120/240 V unit, and Zendure’s installation instructions require a licensed electrician. The manual documents a system of up to two stations and up to 7,600 W combined. Because only one V6400 is included here, neither the two-station topology nor the combined output can be assumed. The evidence does not settle the exact single-station circuit arrangement. Confirm whether this package supports the intended service and circuits before choosing it as a fixed backup system.
The four ordinary station receptacles are 120 V; two Zen outlets support the stated selectable modes. Solar input can be up to 3,000 W within the manual’s electrical limits, but the offer contains no panel. AC charging is voltage-sensitive—up to 1,800 W at 120 V and 3,600 W at 240 V. The Home Panel’s circuit count does not change those input or outlet ratings.
Mass and matching constraints are material
The V6400 is about 130 lb, each B6400 about 101 lb, and the Home Panel about 19.4 lb. Together these named components weigh roughly 452.4 lb before packaging. Plan separate battery moves, cable reach, storage ventilation and installer access. Zendure’s manual also says not to mix the V6400 battery type with V4600/B4600 packs; the three included satellites are all the matching B6400 type.
This bundle suits a stationary, professionally planned backup where both reserve and panel inclusion are important. It is a poor purchase if the panel will not be installed, if the single-station output is inadequate, or if weight cannot be managed. The no-panel V6400/3 offer is the simpler local-outlet choice; a true paired two-station plan requires its own exact selection and evidence.
The remaining pack slot does not change the panel question
Zendure’s U.S. manual describes the V6400/B6400 as semi-solid-state, lists a 3,000-cycle manufacturer figure and warns against mixing battery types. It is not an independent life test or a promise of service duration. The fourth compatible pack adds 6,438 Wh of nameplate energy and around 101 lb to this three-pack package, but it still does not raise the one-station 3,800 W continuous output. The selected Home Panel remains a separate electrical installation issue.
The panel manual gives its own 10-circuit and 120/240 V ratings and specifies licensed-electrician installation; the product selector does not resolve how this single V6400 is configured to serve a particular house. Bring your panel details and intended loads to the installer and confirm the plan with Zendure. If that path is not settled, compare the no-panel three-pack offer on the limited claim it clearly supports: extra storage for the station’s local outlets.
Key details at a glance
| Nameplate battery capacity | 25752 Wh |
|---|---|
| Rated AC output | 3800 W |
| Manufacturer surge rating | 5000 W |
| Maximum solar input | 3000 W |
| Included panels, combined nameplate | 0 W |
| Maximum USB-C output per port | 100 W |
More specifications and setup details
| Listed weight | 130 lb |
|---|---|
| Compatible extra-battery expansion | Yes |
| 12 V DC output | 126 W |
| Manufacturer UPS transfer figure | 13 ms |
| AC outlet output | Yes |
| USB-C ports | 4 |
| USB-A ports | 2 |
| Battery chemistry | Semi-solid-state battery |
| Expansion battery in this package | Yes |
| Home Power Panel in this package | Yes |
| HPP 120/240 V split-phase | Yes |
| Separate station units in offer | 1 |
| Smart Transfer Switch in this package | Yes |
| Expansion packs in exact offer | 3 |
| Solar panels in exact offer | 0 |
| Included expansion batteries | 3 units |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
A useful match starts with the loads that matter.
Use the finder for hard electrical requirements, then check appliance starting behavior, actual run time and the exact package in the full assessment.
